TOP: PL.8623C-5000(33);Middle: PL.8623B-5000(33);Primer: PL.8623A(2)
Availability: | |
---|---|
Product | Three layer water-soluble polyether sulfonic fluorine nonstick coating |
Model | Top:PL.8623C-5000(33) Middle:PL.8623B-5000(33) Primer: PL.8623A(2) |
Color | Black |
Main Chemical Composition | PES Binder, PTFE Anti-adherent, Pigment filler, Mixed Aqueous Solution |
Viscosity (Room Temperature of 25℃, IWATA NK-2 Viscosity Cup) | Top Coat: 15 to 30s Middle Coat: 20-30s Primer Coat: 23-50s (Due to the influence of climate and temperature, a moderate deviation is normal.) |
Specific Weight | 0.98-1.06KG/L |
Solid-containing Content | Top : 38%±2% Middle:38%±2% Primer: 36%±2% |
Sintering Temperature | Top : 400-425℃ Middle:No sintering Primer: 130-180℃ |
Coating Thickness | 33 to 45um |
Packaging Specification | 20kg per plastic barrel with carton |
Storage Condition | Avoid high temperature exposure. Should be stored in a ventilated and cool environment at room temperature. |
Shelf Life | 6 Months |
Application | All kinds of kitchenware and tableware made from metal, aluminum, stainless steel, etc. |
Property Testing | Standard | Method |
Appearance of Original Paint | Thick and Sticky Liquid | Eyeballing |
Appearance of Coating Film | Flat and smooth without obvious,roughness,bittiness,discoloration,and scratches. | Soak for 72 hours in 10% salt water. The coating film should have no abnormality. |
Adhesion | No fall-off of the coating film | 50-KG recoil for 2 times. Scrape the coating surface with a knife on the breach. Then scrape it down with nails, and there should be no obvious peeling off. |
Layer Adhesion | The falling grid should be 1 or less when 3M tape is pulled 5 times in different directions. | Draw a 100-square grid of 1mm X 1mm on the surface of the coating, then drag a 3M tape to test. |
Hardness | ≥2H | Use pencil of 2H-3H with hardness tester |
Acid Resistance | No abnormality of the coating film | Boil for 30 minutes or longer in a reagent hydrochloric acid solution with a volume fraction of 12% |
Boiling Water Resistance | No fall-off of the coating film | Test the adhesion after boiling water for 200 hours |
Corrosion Resistance | No fall-off of the coating film | Boil for 100 hours in the salt water with a volume fraction of 5%, heating to the temperature of over 90℃ |
Alkali Resistance | No abnormality of the coating film | Soak for 12 hours in 3% sodium hydroxide solution |
Anti-stick | Good | Boil milk and fry egg without stick |
Heat Resistance | No fall-off of the coating film | Put the sample into the oven of 260℃ for 10 hours. Wait for it to cool down to room temperature and take it out for Observation.
|
Abrasion Resistance (Test item is a slab) | After 5000-time abrasion or more, there is no obvious wear-out on the coating. | Wet grinding test (5% dishwashing liquid +95% tap water) with 3M 7447B cloth and 4.5KG weight, back and forth for one time, 500 times turn one side. |
Health Indicator | International Standard | Certification of ROHS, FDA, LFGB, REACH |
Test Standard | National Standard | GB/T32095.1-2015 GB/T32095.2-2015 GB/T32095.3-2015 GB/T32095.4-2015 |
Applications of PES Non-stick Coating
·Easy-cleaning
·Long Service Life
·Super Heat-resistant
·Environmental & Safe
·Strong Adhesion
·Great Rigidity
·High Practicability & Processability
·Strong Chemical Resistance
Product | Three layer water-soluble polyether sulfonic fluorine nonstick coating |
Model | Top:PL.8623C-5000(33) Middle:PL.8623B-5000(33) Primer: PL.8623A(2) |
Color | Black |
Main Chemical Composition | PES Binder, PTFE Anti-adherent, Pigment filler, Mixed Aqueous Solution |
Viscosity (Room Temperature of 25℃, IWATA NK-2 Viscosity Cup) | Top Coat: 15 to 30s Middle Coat: 20-30s Primer Coat: 23-50s (Due to the influence of climate and temperature, a moderate deviation is normal.) |
Specific Weight | 0.98-1.06KG/L |
Solid-containing Content | Top : 38%±2% Middle:38%±2% Primer: 36%±2% |
Sintering Temperature | Top : 400-425℃ Middle:No sintering Primer: 130-180℃ |
Coating Thickness | 33 to 45um |
Packaging Specification | 20kg per plastic barrel with carton |
Storage Condition | Avoid high temperature exposure. Should be stored in a ventilated and cool environment at room temperature. |
Shelf Life | 6 Months |
Application | All kinds of kitchenware and tableware made from metal, aluminum, stainless steel, etc. |
Property Testing | Standard | Method |
Appearance of Original Paint | Thick and Sticky Liquid | Eyeballing |
Appearance of Coating Film | Flat and smooth without obvious,roughness,bittiness,discoloration,and scratches. | Soak for 72 hours in 10% salt water. The coating film should have no abnormality. |
Adhesion | No fall-off of the coating film | 50-KG recoil for 2 times. Scrape the coating surface with a knife on the breach. Then scrape it down with nails, and there should be no obvious peeling off. |
Layer Adhesion | The falling grid should be 1 or less when 3M tape is pulled 5 times in different directions. | Draw a 100-square grid of 1mm X 1mm on the surface of the coating, then drag a 3M tape to test. |
Hardness | ≥2H | Use pencil of 2H-3H with hardness tester |
Acid Resistance | No abnormality of the coating film | Boil for 30 minutes or longer in a reagent hydrochloric acid solution with a volume fraction of 12% |
Boiling Water Resistance | No fall-off of the coating film | Test the adhesion after boiling water for 200 hours |
Corrosion Resistance | No fall-off of the coating film | Boil for 100 hours in the salt water with a volume fraction of 5%, heating to the temperature of over 90℃ |
Alkali Resistance | No abnormality of the coating film | Soak for 12 hours in 3% sodium hydroxide solution |
Anti-stick | Good | Boil milk and fry egg without stick |
Heat Resistance | No fall-off of the coating film | Put the sample into the oven of 260℃ for 10 hours. Wait for it to cool down to room temperature and take it out for Observation.
|
Abrasion Resistance (Test item is a slab) | After 5000-time abrasion or more, there is no obvious wear-out on the coating. | Wet grinding test (5% dishwashing liquid +95% tap water) with 3M 7447B cloth and 4.5KG weight, back and forth for one time, 500 times turn one side. |
Health Indicator | International Standard | Certification of ROHS, FDA, LFGB, REACH |
Test Standard | National Standard | GB/T32095.1-2015 GB/T32095.2-2015 GB/T32095.3-2015 GB/T32095.4-2015 |
Applications of PES Non-stick Coating
·Easy-cleaning
·Long Service Life
·Super Heat-resistant
·Environmental & Safe
·Strong Adhesion
·Great Rigidity
·High Practicability & Processability
·Strong Chemical Resistance